Paint the wood floor is made directly through the wood sawing, grooving, paint made of logs because the growth process is often subject to various violations of nature's defects will affect the quality of the floor, which are of primary (hereditary) , another floor under the influence of the production, testing, installation and use of the environment will also have all kinds of questions are the causes and treatment of several common defects for example as follows:

First, sound

    The noise floor is generally sub-structural and stress release two, the former mainly by tongue and groove flooring and partial loose, loose ground or floor cage to cage and fixed is not strong due to generally deal with more complex, you can use anechoic fluid injection noise mitigation, to solve the need to re-install, which often can not find the sound source, with irregular sound, usually placed furniture or the floor after the balance over time can be self-eliminate.

Second, the tile (arch tall than or equal to 1.2m / m)

    Floor tiles must be moisture over the back of the front caused by moisture, resulting in positive and negative uneven moisture content, one of the reasons is due to the absorption of moisture under the floor, the second reason is because of the high moisture content of the floor itself, the surface through ventilation It can also result in uneven floor front and back of the moisture content. Processing see the extent of the size of the tile, can relax the income side of the floor, polished after the partial replacement or repainting process.

Third, the shrinkage (not less than two plate interspaces 2 m / m)

Floor contraction by the high moisture content of the wood itself or caused by natural properties, according to the size of the contraction joints, can be used to fill joints or re-disassembly process.

Fourth, bagging
    Bagging the floor, usually because the installation does not leave enough space cause, as long as the income side of the floor plate can be repositioned or relax.

V. crack (split end length equal to 4% greater than the length of the floor)
   Sub floor cracking and fracture crack path due to the production process of hate material inspection lax, the congenital cracking hate material for the production floor, the other due to the dark crack hate material in the production of hard to find, once installed floor ventilation, Now it is exposed, often resulting in the surface paint wrinkling, general treatment cover with a modified solution, partial replacement or re-entry.

Sixth, peeling paint

   Floor paint off, usually because of poor paint adhesion caused, may also be affected by other chemicals impact. Paint adhesion is poor quality paint caused by the general, there may be material and floor hate high moisture content caused or sanding is not in place, small-scale peeling paint repair, replacement of large areas of peeling paint or re-polished paint.

Seven, pest

Floor Poles have two kinds of congenital and regeneration, as roundwood production process, often by Poles after leaving against insects, after drying degreasing, these Poles use does not matter, it will not appear worm, the paint make up after the basic feel naked eye. Renewable pest floor in the environment of use is caused (such as termites), we must first find when dealing with insect, look at the severity of the need for partial or complete replacement of heavy equipment, where particular emphasis floor vermin unlikely, often to cage produced a lot.

Eight, the drum

Some floor Puwan, moisture expansion and the emergence from the dark. This is mostly related to the floor surrounding environment, especially basic floor is too moist or water related. To ensure that the floor can not afford to drum, to pay attention to three points: First, the end of the civil works, laying solid wood floor is not immediate; Second, if the room is in a humid environment, moisture-proof floor is appropriate to lay; Third, in the laying of the floor the moisture content of not less than 6%.

Nine, painted face

    Using the same species battens, the color will appear a big difference. If laid properly, it can easily showing a "painted face." Using color varnished wood flooring, especially when the color of great trees slats, you should consider the selection and deployment of the slats, so that the color of the floor of the Deep, or the gradual transition from a shallow depth.